2003 Jeep Wrangler Drive Axle Shaft Parts

Choose your Submodel for your 2003 Jeep Wrangler


Showing 1 - 10 of 17 products
Image
SKU
Product
Rating
Price

G2 Axle and Gear
  • Dana 30;Chromoly Inner 27 Spline; 32.312 in. Length; Accepts 5-760X U-Joint; RH[Passenger Side] Machined To Accept Full Circle Clips
  • Axle Shaft; Dana 30;Chromoly Inner Axle Shaft; 27 Spline; 32.312 in. Length; Accepts 5-760X U-Joint; RH[Passenger Side];
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 30
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • G2 Axle And Gear Chromoly Inner Axle Shaft Dana 30
    • Dana 30
    • 27 Spline
    • For Use In 87-06 Jeep XJ/YJ/TJ W/5-760X U-Joint
    • Accepts 5-760X U-Joint
    • 32.312 in. Overall Length
    • Passenger Side
    • Machined To Accept Full Circle Clips
  • G2'S High Strength Axle Shafts Are Engineered To Withstand The Added Load Of High Torque Applications And To Remedy The Common Faults Found With Factory Shafts. Forged From High Grade Alloy Steel And Heat Treated To Exceed OEM Specifications, These Axles Are Designed For Extended Service Life. Added Features Such As Big Spline Options, Rolled Splines And Use Of Better Materials Allow You To Confidently Run Larger Tires Without The Risk Of Failure.

Additional Fitment Information:
Vehicle Position Sub Model
2003 - Jeep Wrangler Inner Sahara

Spicer
  • CHROMOLY AXLE SHAFT - DANA 44
  • with Dana 44 Axle with 16.96in Axle with 30 Spline Teeth with 5-760X Universal Joint - Required
  • FSGR
  • Product Attributes:
    • Axle Type: Inner
    • Retainer Ring Included: N
    • Quantity: 1
    • ABS/Non-ABS: Non-abs
    • ABS Sensor Ring Installed: N
    • Axle Model: Dana 44
    • Outer Axle Included: N
    • Seal Kit Included: N
    • Wheel Bearing Included: N
    • Wheel Nuts Included: N
    • ABS Tone Ring Included: No
    • Full-Floating Or Semi-Floating: Semi-floating
    • Includes Tone: N
    • Seal Included: N
    • Inner Axle Included: Y
    • Wheel Studs Included: N
    • Axle Shaft Included: Y
    • U-Joint Included: N
    • Spline Count: 30 Inboard
    • Wheel Bolt Prep Kit Included: N
    • Cover Bolt Quantity: 10
    • Bearing Included: N
  • Features:
    • Engineered to exceed the OE standards and meet the exacting needs of off-road environments.
    • SAE 4340 nickel chromoly steel construction for ideal hardness throughout the part.
    • Nickel provides additional toughness and chromium ensures high temperature strength along with resistance to abrasion.
    • Heat treatment process delivers consistent surface and face hardness while achieving a higher core hardness for greater strength.
  • These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.

Additional Fitment Information:
Vehicle Position Sub Model
2003 - Jeep Wrangler Front Left Inner Rubicon

Spicer
  • CHROMOLY AXLE SHAFT - DANA 44
  • with Dana 44 Axle with 30 Spline Teeth with 31.84in Axle with 5-760X Universal Joint - Required
  • FSGR
  • Product Attributes:
    • Axle Type: Inner
    • Retainer Ring Included: N
    • Quantity: 1
    • ABS/Non-ABS: Non-abs
    • ABS Sensor Ring Installed: N
    • Axle Model: Dana 44
    • Outer Axle Included: N
    • Seal Kit Included: N
    • Wheel Bearing Included: N
    • Wheel Nuts Included: N
    • ABS Tone Ring Included: No
    • Full-Floating Or Semi-Floating: Semi-floating
    • Includes Tone: N
    • Seal Included: N
    • Inner Axle Included: Y
    • Wheel Studs Included: N
    • Axle Shaft Included: Y
    • U-Joint Included: N
    • Spline Count: 30 Inboard
    • Wheel Bolt Prep Kit Included: N
    • Cover Bolt Quantity: 10
    • Bearing Included: N
  • Features:
    • Engineered to exceed the OE standards and meet the exacting needs of off-road environments.
    • SAE 4340 nickel chromoly steel construction for ideal hardness throughout the part.
    • Nickel provides additional toughness and chromium ensures high temperature strength along with resistance to abrasion.
    • Heat treatment process delivers consistent surface and face hardness while achieving a higher core hardness for greater strength.
  • These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.

This Part Fits the Following OEM/Substitute Numbers:
DS10007746, MG20114B, YA W39602

Additional Fitment Information:
Vehicle Position Sub Model
2003 - Jeep Wrangler Front Right Inner Rubicon

Crown Automotive
  • For Use w/Dana 30 And Dana 30 Reverse
  • Axle Shaft; For Use w/Dana 30 And Dana 30 Reverse;
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 30
    • WARNING CA Proposition 65: No
  • Features:
    • Axle Shaft
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position Sub Model BrakeABS
2003 - Jeep Wrangler Front Left Rubicon Non-ABS

Crown Automotive
  • For Use w/Dana 30
  • Axle Shaft; For Use w/Dana 30;
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 30
    • WARNING CA Proposition 65: No
  • Features:
    • Axle Shaft
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position Sub Model BrakeABS
2003 - Jeep Wrangler Front Outer Rubicon Non-ABS

Crown Automotive
  • w/o Disconnect; Cardan Style Axle; For Use w/Dana 30 And Dana 30 Reverse
  • Axle Shaft; w/o Disconnect; Cardan Style Axle; For Use w/Dana 30 And Dana 30 Reverse;
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 30
    • WARNING CA Proposition 65: No
  • Features:
    • Axle Shaft
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position Sub Model BrakeABS
2003 - Jeep Wrangler Front Right Rubicon 4-Wheel ABS

Crown Automotive
  • w/o Disconnect; For Use w/Dana 30 And Dana 30 Reverse
  • Axle Shaft; w/o Disconnect; For Use w/Dana 30 And Dana 30 Reverse;
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 30
    • WARNING CA Proposition 65: No
  • Features:
    • Axle Shaft
  • Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:
Vehicle Position Sub Model BrakeABS
2003 - Jeep Wrangler Front Right Rubicon Non-ABS

Spicer
  • CHROMOLY AXLE SHAFT - DANA 44
  • with 16.96in Axle with 30 Spline Teeth with 5-760X Universal Joint - Required with Dana 44 Axle
  • FSGR
  • Product Attributes:
    • Axle Type: Inner
    • Retainer Ring Included: N
    • Quantity: 1
    • ABS/Non-ABS: Non-abs
    • ABS Sensor Ring Installed: N
    • Axle Model: Dana 44
    • Outer Axle Included: N
    • Seal Kit Included: N
    • Wheel Bearing Included: N
    • Wheel Nuts Included: N
    • ABS Tone Ring Included: No
    • Full-Floating Or Semi-Floating: Semi-floating
    • Includes Tone: N
    • Seal Included: N
    • Inner Axle Included: Y
    • Wheel Studs Included: N
    • Axle Shaft Included: Y
    • U-Joint Included: N
    • Spline Count: 30 Inboard
    • Wheel Bolt Prep Kit Included: N
    • Cover Bolt Quantity: 10
    • Bearing Included: N
  • Features:
    • Engineered to exceed the OE standards and meet the exacting needs of off-road environments.
    • SAE 4340 nickel chromoly steel construction for ideal hardness throughout the part.
    • Nickel provides additional toughness and chromium ensures high temperature strength along with resistance to abrasion.
    • Heat treatment process delivers consistent surface and face hardness while achieving a higher core hardness for greater strength.
  • These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.

This Part Fits the Following OEM/Substitute Numbers:
DS10007745, MG20125B, YA W39601

Additional Fitment Information:
Vehicle Position Sub Model
2003 - Jeep Wrangler Front Left Inner Rubicon

Spicer
  • AXLE SHAFT DANA 30 FRONT
  • with ABS Ring
  • FSGR
  • Product Attributes:
    • Axle Type: Outer
    • Retainer Ring Included: N
    • Quantity: 1
    • ABS/Non-ABS: Abs
    • ABS Sensor Ring Installed: Y
    • Axle Model: Dana 30
    • Outer Axle Included: Y
    • Seal Kit Included: N
    • Wheel Bearing Included: N
    • Wheel Nuts Included: N
    • ABS Tone Ring Included: Yes
    • Full-Floating Or Semi-Floating: Semi-floating
    • Includes Tone: N
    • Seal Included: N
    • Inner Axle Included: N
    • Wheel Studs Included: N
    • Axle Shaft Included: Y
    • U-Joint Included: N
    • Spline Count: 27 Outboard
    • Wheel Bolt Prep Kit Included: N
    • Cover Bolt Quantity: 10
    • Bearing Included: N
  • Features:
    • Genuine OE quality. Tested and proven.
    • Ultrasonically tested for internal cracks that magnetic testing can miss.
    • Built from high grade steel that stands up to any grade on the market.
    • Includes tone ring
  • Strength and durability to ensure longer life. Get genuine performance from genuine Spicer. Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements, because they are OE parts, ensuring a perfect fit with our full line of industry leading axles. That is why Spicer is the name you can trust for top performance and durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
DS75007X

Additional Fitment Information:
Vehicle Position
2003 - Jeep Wrangler Front Outer

Spicer
  • AXLE SHAFT DANA 30 FRONT
  • Replaces OE Part Number(s) 4728984 with ABS Ring
  • FSGR
  • Product Attributes:
    • Axle Type: Outer
    • Retainer Ring Included: N
    • Quantity: 1
    • ABS/Non-ABS: Abs
    • ABS Sensor Ring Installed: Y
    • Axle Model: Dana 30
    • Outer Axle Included: Y
    • Seal Kit Included: N
    • Wheel Bearing Included: N
    • Wheel Nuts Included: N
    • ABS Tone Ring Included: Yes
    • Full-Floating Or Semi-Floating: Semi-floating
    • Includes Tone: N
    • Seal Included: N
    • Inner Axle Included: N
    • Wheel Studs Included: N
    • Axle Shaft Included: Y
    • U-Joint Included: N
    • Spline Count: 27 Outboard
    • Wheel Bolt Prep Kit Included: N
    • Cover Bolt Quantity: 10
    • Bearing Included: N
  • Features:
    • Genuine OE quality. Tested and proven.
    • Ultrasonically tested for internal cracks that magnetic testing can miss.
    • Built from high grade steel that stands up to any grade on the market.
    • Includes tone ring
  • Strength and durability to ensure longer life. Get genuine performance from genuine Spicer. Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements, because they are OE parts, ensuring a perfect fit with our full line of industry leading axles. That is why Spicer is the name you can trust for top performance and durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position
2003 - Jeep Wrangler Front Outer
Showing 1 - 10 of 17 products

Loading...