1996 ICON Vehicle Dynamics Parts

Choose a Make for your 1996 vehicle

Lexus Toyota

Showing 1 - 10 of 45 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1996 Toyota Tacoma Shock Absorber - Rear ICON Vehicle Dynamics

Used with 0" to 1.5" Lift Except 5 Lug Models
ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved performance. These shocks feature remote reservoirs, are vehicle specific, 100% rebuildable/revalveable.
96-04 TACOMA 4WD 0-1.5" REAR 2.0 VS RR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Eyelet
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Title: 96-04 Tacoma 4wd 0-1.5" Rear 2.0 Vs Rr
- Bushing Material: Polyurethane
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: Yes
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1996 - Toyota Tacoma	Rear

Brand	ICON Vehicle Dynamics
Part #	56502R
Condition	New

1996 Toyota Tacoma Suspension Lift Kit - Front and Rear ICON Vehicle Dynamics

0" - 3" Lift Except 5 Lug Models
1995.5-2004 TACOMA 0-3" LIFT STAGE 2 SUSPENSION SYSTEM
95.5-04 TACOMA 0-3" STAGE 2 SUSPENSION SYSTEM
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required.)
- Spring Rate: 650
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5 With 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9 With 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9 With 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Spring Leaf Quantity: 3
- Bushings Included: Yes
- Spring Color: Black
- Maximum Lift: 3
- Title: 95.5-04 Tacoma 0-3" Stage 2 Suspension System
- Coils Quantity Front: 2
- Spring Material: Steel
- Shocks Included: Yes
- OEM Wheels & Tires Fitment: Yes
Features:
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Adjustable coilovers from 0-3" of lift height
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock body with 7/8" hardened chrome shaft
- FK rod end bearings for extended longevity and minimal deflection
- 2.0 aluminum body rear Emulsion shock with 5/8" polished chrome plated steel shaft
- 100% Bolt-on system - no drilling, cutting, or welding necessary for install
ICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 2 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series remote reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 96-04 Toyota Tacoma 4WD/PreRunner Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.

Additional Fitment Information:

Vehicle	Position
1996 - Toyota Tacoma	Front and Rear

Brand	ICON Vehicle Dynamics
Part #	K53012
Condition	New

1996 Toyota Tacoma Coilover Spring and Shock Assembly - Front ICON Vehicle Dynamics

0" - 3" Lift Except 5 Lug Models Requires Aftermarket front Upper Control Arms
1996-2004 TACOMA/1996-2002 4RUNNER EXT TRAVEL 2.5 VS IR COILOVER KIT
96-04 TACOMA/96-02 4RUNNER EXT TRAVEL 2.5 VS IR COILOVER KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Grade Type: Performance
- Gas Charged: Yes
- Spring Color: Black
- Damping Type: Oil
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: 96-04 Tacoma/96-02 4runner Ext Travel 2.5 Vs Ir Coilover Kit
- Spring Material: Steel
- Service Parts:
  - 252001 - 2.5 Fixed Spanner Wrench
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252003 - Seal Install Tool 2.5/3.0
  - 252004 - Economy Needle Charging Tool
  - 252010 - 2.5 Ifp Rebuild Kit
  - 254100g - 1 Gallon Icon Performance Shock Oil
  - 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
  - 611019 - Coilover Hardware Kit Pair
  - 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
- Shaft Diameter: 0.875
Features:
- Adjustable ride height from 0" - 3
- Race shock piston with flutter stack compression valving
- Cad-plated threaded body
- Billet aluminum upper mount
- 5/8" PTFE-lined spherical bearings
- Completely re-buildable
- 2.5" shock diameter to prevent overheating
- Chrome-silicon spring
- 250 PSI nitrogen-charged internal reservoir
These adjustable coil-over shocks have proven their strength and longevity for years on end and they keep going. These shocks offer the best ride quality and handling. They increase suspension travel and dramatically increase the capabilities of your Tacoma or 4Runner's front suspension. These coil-over’s are meant to be installed with an aftermarket uniball upper control arm kit to ensure the proper amount of wheel travel and to prevent premature ball joint wear. These are a Race-Proven shock designed for the daily driver and the avid off-roader all in one!

Additional Fitment Information:

Vehicle	Position
1996 - Toyota Tacoma	Front

Brand	ICON Vehicle Dynamics
Part #	58615
Condition	New

1996 Toyota Tacoma Leaf Spring Axle U-Bolt Kit - Rear ICON Vehicle Dynamics

Except 5 Lug Models
These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
TOYOTA REAR 8.0" U-BOLT KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Nuts Included: Yes
- Grade Type: Performance
- Length: 8
- Title: Toyota Rear 8.0" U-bolt Kit
Features:
- Measures 8 inches in length
- Includes installation hardware
- For one axle
These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.

Additional Fitment Information:

Vehicle	Position
1996 - Toyota Tacoma	Rear

Brand	ICON Vehicle Dynamics
Part #	52050
Condition	New

1996 Toyota 4Runner Coil Spring Set - Rear ICON Vehicle Dynamics

1996-2002 TOYOTA 4RUNNER 1" LIFT REAR COIL SPRING KIT
96-02 4RUNNER 1" REAR COIL SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Spring Color: Black
- Rear Spring Rate Type: Constant
- Rear Spring Seat Included: No
- Grade Type: Performance
- Maximum Lift Height: 1
- Title: 96-02 4runner 1" Rear Coil Spring Kit
- Spring Material: Steel
Features:
- Easy install makes for a simple and cost-effective upgrade.
- Single-rate coil allows for exceptional ride quality and performance
- Dual stage powder coat for corrosion resistance
- ICON engineered coil spring guaranteed for life against sagging and breaking
These 1" lift rear coil springs improve your on and off-road ride quality while the slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires. When used in conjunction with ICON's rear 2.0 Aluminum Series or 2.5 Series shocks, the ride quality and performance is unbeatable.

Additional Fitment Information:

Vehicle	Position
1996 - Toyota 4Runner	Rear

Brand	ICON Vehicle Dynamics
Part #	53015
Condition	New

1996 Toyota Tacoma Leaf Spring - Rear ICON Vehicle Dynamics

96-UP TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
Use Up To 33 (in) x 11.50 (in) Tires Requires Removal of OE Leaf Spring Overload Leaves Raises Rear 1.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
1996-UP TACOMA/2000-2006 TUNDRA 1.5" LIFT ADD-A-LEAF KIT
96-23 TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Maximum Lift: 1.5
- Axle Modification Needed: No
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Quantity: 3
- Suspension Grade Type: Performance
- Axle Orientation: Rear
- Title: 96-up Tacoma/00-06 Tundra 1.5" Add-a-leaf Kit
- U Bolts Included: Yes
- Bushings Included: No
Features:
- Kit lifts truck by 1.5 inches
- Uses high-quality progressive rate left springs smooth out your ride
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
This three-leaf progressive rate Add A Leaf Kit comes complete with u-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.

Additional Fitment Information:

Vehicle	Position	Sub Model	Drive Type
1996 - Toyota Tacoma	Rear	DLX	4WD

Brand	ICON Vehicle Dynamics
Part #	51100
Condition	New

1996 Toyota Tacoma Leaf Spring Axle U-Bolt Kit - Rear ICON Vehicle Dynamics

These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.
TOYOTA REAR 8.0" U-BOLT KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Nuts Included: Yes
- Grade Type: Performance
- Length: 8
- Title: Toyota Rear 8.0" U-bolt Kit
Features:
- Measures 8 inches in length
- Includes installation hardware
- For one axle
These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, and washers.

Additional Fitment Information:

Vehicle	Position	Sub Model	Drive Type
1996 - Toyota Tacoma	Rear	Base	4WD

Brand	ICON Vehicle Dynamics
Part #	52050
Condition	New

1996 Toyota Tacoma Suspension Shock Absorber - Rear ICON Vehicle Dynamics

Used with 0 (in) to 1.5 (in) Lift
ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
96-04 TACOMA 4WD 0-1.5" REAR 2.0 VS NR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Eyelet
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Title: 96-04 Tacoma 4wd 0-1.5" Rear 2.0 Vs Nr
- Bushing Material: Polyurethane
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252004 - Economy Needle Charging Tool
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Drive Type
1996 - Toyota Tacoma	Rear	4WD

Brand	ICON Vehicle Dynamics
Part #	56502
Condition	New

1996 Toyota 4Runner Suspension Shock Absorber - Rear ICON Vehicle Dynamics

Used with 0" to 2" Lift
ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
96-02 4RUNNER 0-2" REAR 2.0 VS NR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 96-02 4runner 0-2" Rear 2.0 Vs Nr
- Bushing Material:
  - Polyurethane
  - Rubber
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252004 - Economy Needle Charging Tool
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1996 - Toyota 4Runner	Rear

Brand	ICON Vehicle Dynamics
Part #	56514
Condition	New

1996 Toyota Tacoma Coilover Spring and Shock Assembly - Front ICON Vehicle Dynamics

0 (in) - 3 (in) Lift Requires Aftermarket front Upper Control Arms
1996-2004 TACOMA/1996-2002 4RUNNER EXT TRAVEL 2.5 VS IR COILOVER KIT
96-04 TACOMA/96-02 4RUNNER EXT TRAVEL 2.5 VS IR COILOVER KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Grade Type: Performance
- Gas Charged: Yes
- Spring Color: Black
- Damping Type: Oil
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: 96-04 Tacoma/96-02 4runner Ext Travel 2.5 Vs Ir Coilover Kit
- Spring Material: Steel
- Service Parts:
  - 252001 - 2.5 Fixed Spanner Wrench
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252003 - Seal Install Tool 2.5/3.0
  - 252004 - Economy Needle Charging Tool
  - 252010 - 2.5 Ifp Rebuild Kit
  - 254100g - 1 Gallon Icon Performance Shock Oil
  - 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
  - 611019 - Coilover Hardware Kit Pair
  - 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- OEM Wheels & Tires Fitment: Yes
- Remote Reservoir: No
- Shaft Diameter: 0.875
Features:
- Adjustable ride height from 0" - 3
- Race shock piston with flutter stack compression valving
- Cad-plated threaded body
- Billet aluminum upper mount
- 5/8" PTFE-lined spherical bearings
- Completely re-buildable
- 2.5" shock diameter to prevent overheating
- Chrome-silicon spring
- 250 PSI nitrogen-charged internal reservoir
These adjustable coil-over shocks have proven their strength and longevity for years on end and they keep going. These shocks offer the best ride quality and handling. They increase suspension travel and dramatically increase the capabilities of your Tacoma or 4Runner's front suspension. These coil-over’s are meant to be installed with an aftermarket uniball upper control arm kit to ensure the proper amount of wheel travel and to prevent premature ball joint wear. These are a Race-Proven shock designed for the daily driver and the avid off-roader all in one!