2004 Lexus ICON Vehicle Dynamics Parts

Choose a Model for your 2004 Lexus

GX470 LX470

Showing 1 - 10 of 78 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2004 Lexus GX470 Coil Spring Set - Rear ICON Vehicle Dynamics

Requires ICON Rear Coil Conversion Kit Part # 56110
These ICON mult-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires.
07-UP FJ/03-UP 4RNR/03-UP GX REAR 2" SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Spring Color: Black
- Rear Spring Rate Type: Constant
- Rear Spring Seat Included: No
- Grade Type: Performance
- Maximum Lift Height: 2
- Title: 07-up Fj/03-up 4rnr/03-up Gx Rear 2" Spring Kit
- Spring Material: Steel
Features:
- Dual stage powder coat for long-lasting corrosion resistance
- ICON engineered coil spring guaranteed for life against sagging and breaking
- Easy install makes for a simple and cost effective upgrade
- Linear-rate coil allows for exceptional ride quality and performance
These Linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires. When used in conjunction with ICON's rear 2.0 Aluminum Series or 2.5 Series shocks, the ride quality and performance is unbeatable.

Additional Fitment Information:

Vehicle	Position
2004 - Lexus GX470	Rear

10 In Stock

$399.65 CAD

$479.58 CAD

Brand	ICON Vehicle Dynamics
Part #	I4352700
Condition	New
Warehouse	B

2004 Lexus GX470 Coil Spring Set - Rear ICON Vehicle Dynamics

07-UP FJ/03-UP 4RUNNER REAR 3" DUAL RATE SPRING KIT
with Additional Weight Added to Rear End Requires ICON Rear Coil Conversion Part # 56110
Developed for the expedition-style off-roader that loads down their vehicle with bumpers, winches, rooftop tents, etc., these ICON coil springs will provide 3" of lift in an unloaded vehicle, and 2" of lift with typical overland equipment.
07-14 FJ/03-UP 4RUNNER REAR 3" DUAL RATE SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Spring Color: Black
- Rear Spring Rate Type: Variable
- Rear Spring Seat Included: No
- Grade Type: Performance
- Maximum Lift Height: 3
- Title: 07-up Fj/03-up 4runner Rear 3" Dual Rate Spring Kit
- Spring Material: Steel
Features:
- Up to 3" of lift
- Easy install makes for a simple and cost effective upgrade.
- Multi-rate coil allows for exceptional ride quality whether loaded down or empty.
- Great option for aggressive drivers as second rate will help reduce bottom-out.
- Eibach-manufactured coil spring guaranteed for life against sagging and breaking.
The ICON Vehicle Dynamics Overland Series Rear Coil Spring Kit was developed for the expedition-style offroader who is loading down their vehicle with bumpers, winches, rooftop tents, and more. ICON engineers developed this multi-rate coil spring to provide compliant handling and the exceptional on and off-road ride quality you would expect from an ICON product. This coil spring kit will deliver 3" of lift in an unloaded vehicle, and 2" of lift when loaded down with a typical list of overland equipment. Designed by ICON and manufactured by Eibach, these springs are guaranteed for life not to sag or break.

Additional Fitment Information:

Vehicle	Position
2004 - Lexus GX470	Rear

1 In Stock

$484.38 CAD

$581.26 CAD

Brand	ICON Vehicle Dynamics
Part #	I4352800
Condition	New
Warehouse	B

2004 Lexus GX470 Shock Absorber Dust Cover - Rear Lower ICON Vehicle Dynamics

07-14 FJ/03-23 4RUNNER/22-23 TUNDRA/23 SEQUOIA REAR SHIN GUARDS
ICON’s Rear Lower Shin Guard protects shocks against dragging on rocks and other obstacles preventing premature wear of the shaft. Stainless steel construction guards against exposure to the elements and road debris.
07-14 FJ/03-UP 4 RUNNER REAR SHIN GUARDS
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Title: Icon 03-23 4runner/07-14 Fj Cruiser/22-23 Tundra/23 Sequoia Rear Shin Guards
Features:
- 12 Gauge 304 Stainless Steel Contruction
- Shock Mount Molded Design Maintains Clearance & Will Work with most Aftermarket Rear Shocks
- T.I.G. Welded Joints for Strength and Aesthetics
- ICON’s “Shin Guard” design Protects against debris from Prematurely Wearing the Shock’s Shaft, which will Increase Longevity
This Rear Lower Shock Shin Guard is made out of 304 stainless steel. This guard prevents your rear shocks from dragging on rocks and other obstacles while on your off-road adventures. The Shin Guard design helps prevent debris from prematurely wearing your shock's shaft which will prolong the shocks life. Stainless steel was our first choice for this piece because it is exposed to the elements and road debris more than any other part of the rear suspension. The hardened stainless will prevent corrosion and will not gouge like common steel skids.

Additional Fitment Information:

Vehicle	Position
2004 - Lexus GX470	Rear Lower

2 In Stock

$209.78 CAD

$251.74 CAD

Brand	ICON Vehicle Dynamics
Part #	I4356100
Condition	New
Warehouse	B

2004 Lexus GX470 Suspension Stabilizer Bar Bracket - Front ICON Vehicle Dynamics

05-UP TACO/07-09 FJ SWAYBAR RELOCATION KIT
Except KDSS Equipped Models
2005-UP TACOMA/2007-2009 FJ/2003-2009 4RUNNER SWAYBAR RELOCATION KIT
05-UP TACO/ 07-09 FJ SWAYBAR RELOCATION KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Title: 05-up Taco/ 07-09 Fj Swaybar Relocation Kit
These Aluminum Sway Bar Relocation Blocks will move your sway bar one inch forward to avoid any contact with any aftermarket shock. This small investment can save yourself a ton of headache when installing any aftermarket Coil-over Shock.

Additional Fitment Information:

Vehicle	Position
2004 - Lexus GX470	Front

19 In Stock

$70.26 CAD

$84.31 CAD

Brand	ICON Vehicle Dynamics
Part #	I43611030
Condition	New
Warehouse	B

2004 Lexus GX470 Suspension Ball Joint - Front Upper ICON Vehicle Dynamics

Requires aftermarket stock-length upper control arms that feature industry standard 1" uniballs (2.125" OD and 1" Height)
NON-ICON UCalifornia 1" RETROFIT DELTA JOINT KIT 2007-UP TOYOTA FJ CRUISER/2003-UP TOYOTA 4RUNNER/2008-UP TOYOTA LAND CRUISER 200 SERIES
NON-ICON UCalifornia 1" RETROFIT DELTA JOINT KIT 07-UP FJ/03-UP 4RNR/08-UP LC 200
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Nuts Included: Yes
- Tapered Stud: Yes
- Mounting Hardware Included: Yes
- Quantity: Pair
- Greaseable: Yes
- Ball Joint Assembly: Yes
- Cotter Pin Hole: No
- Grease Fitting Included: Yes
- Adjustable: No
- Suspension Grade Type: Performance
- Title: Non-icon Uca 1" Retrofit Delta Joint Kit 07-up Fj/03-up 4rnr/08-up Lc 200
- Mounting Type: Press In
Features:
- Retrofit kits include a pair of Delta Joints, retaining rings, and a supply of anti-seize
- Patented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball
- Sealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris
- Metal on metal internals and a greasable design for maximum longevity and noise-free operation
- Capable of high angularity required for lifted applications
- Carburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly
- Pullout strength greater than comparable industry standard uniball
- Application specific taper pins for precise fit across a wide range of vehicles
- Retrofit kits allow for installation of Delta Joint into wide range of aftermarket upper control arms using a 1" uniball

Additional Fitment Information:

Vehicle	Position
2004 - Lexus GX470	Front Upper

1 In Stock

$463.60 CAD

$556.32 CAD

Brand	ICON Vehicle Dynamics
Part #	I43614561
Condition	New
Warehouse	B

2004 Lexus GX470 Suspension Control Arm Kit - Rear Lower ICON Vehicle Dynamics

ICON’s tubular steel rear lower link arms are a significant upgrade over factory arms due to increases in strength, adjustability, and performance. They are CNC machined 1026 DOM steel, welded in-house, and feature PTFE-lined FK rod ends.
07-UP FJ/03-UP 4RNR/08-UP LC 200/03-UP GX TUBULAR LOWER TRAILING ARM KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- Bushings Included: Yes
- Control Arm Material: Steel
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 07-up Fj/03-up 4rnr/08-up Lc 200/03-up Gx Tubular Lower Trailing Arm Kit
- Control Arm Color: Black
- Bushing Material:
  - Polyurethane
  - Rod End Bearing
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Quality JM16T PTFE-lined FK Rod Ends
- Adjustable for various lift heights & driveline angles
- Offset lower link front pivots improve roll steer
- Tangent lower link barrel design reduces risk of off-road hangups
- Integrated OEM emergency brake bracket mount
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
ICON’s tubular steel rear lower link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability and also utilize a multi durometer bushing that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such as a tangent lower link barrel design that allows for easier sliding over off-road obstacles, and offsetting the front pivots of the lower link for improved roll steer geometry. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.

Additional Fitment Information:

Vehicle	Position
2004 - Lexus GX470	Rear Lower

6 In Stock

$879.33 CAD

$1,055.20 CAD

Brand	ICON Vehicle Dynamics
Part #	I4354000T
Condition	New
Warehouse	B

2004 Lexus GX470 Suspension Track Bar - Rear ICON Vehicle Dynamics

Optimize your rig’s handling and rear axle alignment to avoid premature tire wear and unwanted handling characteristics, especially on lifted vehicles. Bar installs easily and can be adjusted on the vehicle to properly center the rear axle.
07-UP FJ/03-UP 4RNR/03-UP GX REAR ADJ TRACK BAR KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Bushing
- Greaseable: Yes
- Bushings Included: Yes
- Grease Fitting Included: Yes
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Title: 07-up Fj/03-up 4rnr/03-up Gx Rear Adj Track Bar Kit
- Bushing Material: Polyurethane
- Service Parts: 614511 - 54200 Bushing And Sleeve Kit
Features:
- High Misalignment Spacers for Excellent Articulation
- ICON Vehicle Dynamics Life Time Warranty
- On truck Adjustability using ICON's pinch housing and double adjuster
- 3/4" Rod End and Polyurethane Pivots, for excellent strength and longevity
The ICON Adjustable Rear Track Bar is the best way to optimize your four-wheeler's handling and rear axle alignment and avoid premature tire wear and unwanted handling characteristics, especially on lifted vehicles. This bar is easily installed, and can be adjusted on the vehicle to properly center the rear axle.

Additional Fitment Information:

Vehicle	Position
2004 - Lexus GX470	Rear

4 In Stock

$575.53 CAD

$690.64 CAD

Brand	ICON Vehicle Dynamics
Part #	I4354200
Condition	New
Warehouse	B

2004 Lexus GX470 Suspension Shock Absorber - Rear ICON Vehicle Dynamics

Used with 1 (in) to 3 (in) Lift Also Requires Part Number 56110
ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
07-UP FJ/03-UP 4RNR/03-UP GX 1-3" REAR 2.0 VS IR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: Yes
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 07-up Fj/03-up 4rnr/03-up Gx 1-3" Rear 2.0 Vs Ir
- Bushing Material:
  - Polyurethane
  - Rubber
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252004 - Economy Needle Charging Tool
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective suspension upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
2004 - Lexus GX470	Rear

17 In Stock

$354.35 CAD

$425.22 CAD

Brand	ICON Vehicle Dynamics
Part #	I4356505
Condition	New
Warehouse	B

2004 Lexus LX470 Shock Absorber - Rear ICON Vehicle Dynamics

Used with 0 to 3 Lift
ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
91-07 LAND CRUISER 80/100 0-3" REAR 2.0 VS IR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: Yes
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 91-07 Land Cruiser 80/100 0-3" Rear 2.0 Vs Ir
- Bushing Material: Polyurethane
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252004 - Economy Needle Charging Tool
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
Features:
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
2004 - Lexus LX470	Rear

Brand	ICON Vehicle Dynamics
Part #	I4356510
Condition	New
Warehouse	B

2004 Lexus GX470 Suspension Control Arm Kit - Rear Lower ICON Vehicle Dynamics

ICON billet trailing arms are light, strong, and engineered to improve off-road ride quality. Built with CNC machined 6061 aluminum, they feature PTFE-lined rod ends, replaceable nylon rock sliders for protection, and on-vehicle adjustment.
07-UP FJ/03-UP 4RNR/08-UP LC 200/03-UP GX BILLET LOWER TRAILING ARM KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Rod End Bearing
- Bushings Included: Yes
- Control Arm Material: Aluminum
- Control Arm Construction: Billet
- Grease Fitting Included: Yes
- End 2 Type: Bushing
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 07-up Fj/03-up 4rnr/08-up Lc 200/03-up Gx Billet Lower Trailing Arm Kit
- Control Arm Color: Silver
- Bushing Material:
  - Polyurethane
  - Rod End Bearing
- Service Parts: 614509 - 54000 Bushing And Sleeve Kit
Features:
- On vehicle length adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon ROCK Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Greaseable, multi-piece polyurethane bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
ICON's Billet Aluminum Rear Trailing Arms for the Toyota FJ Cruiser, 4Runner, 200 Series Land Cruiser, and Lexus GX are a great replacement for weak factory lower links. These trailing arms are light, strong, and have been engineered to increase the off-road ride quality the vehicle. Constructed out of 6061 CNC-machined billet aluminum, these arms also stand out when bolted up on the vehicle. They include 16T Rod Ends that have a load rating of over 40,000 lbs of pressure as well as a dual rate bushing on the axle side for excellent articulation characteristics with minimal deflection. A replaceable nylon rock slider is incorporated into the design of the arm to prevent any hang-ups on the trail.