1985 Ford Rough Country Parts

Choose a Model for your 1985 Ford


Showing 1 - 10 of 131 products
Image
SKU
Product
Rating
Price

Rough Country
  • Big Bore; Includes Mounting Brackets and Hardware
  • N3 Dual Steering Stabilizer; Big Bore; Includes Mounting Brackets and Hardware;
  • N3 Dual Steering Stabilizer
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Easy Bolt-on Installation.
    • Improves Control And Handling.
    • Reduces Bump Steer.
    • Reduces Tie Rod And Ball Joint Wear And Tear.
    • Chrome Hardened 9/16 in. Piston Rod
  • Steering stabilizers are designed to restrain in.bump steer in. and front end vibration, giving added life to tires, ball joints, and other steering components.

Additional Fitment Information:
Vehicle Sub Model
1985 - Ford F-350 XLT Lariat

Rough Country
  • 1.5 in. Lift Install Time 1-2 Hours~Includes The Following Parts~Coil Springs
  • Front Leveling Kit; 1.5 in. Lift;
  • Front Leveling Kit
  • Product Attributes:
    • Lift/Drop Height: 1.5 In.
    • WARNING CA Proposition 65: No
  • Features:
    • 10-Stage Variable Valving
    • Increased Ground Clearance
    • Levels Front Of Vehicle w/The Rear
  • Give your Ford  a level look from front to rear with Rough Countrys 1.5in coil spring leveling kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance, and is considered one of the best ways to lift a Ford truck! Once installed, this kit can run up to a 32x11.50 tire with factory wheel backspacing. Includes Rough Countrys 5-year Coil Spring Warranty!

Additional Fitment Information:
Vehicle Block CC Position Engine Engine Version CID
1985 - Ford Bronco V 5753 Front 8 Cyl 5.8L Windsor 351

Rough Country
  • Includes Mounting Brackets and Hardware Superseded From PN[87331.20]
  • N3 Steering Stabilizer; Includes Mounting Brackets and Hardware;
  • N3 Steering Stabilizer
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Easy Bolt-on Installation.
    • Improves Control And Handling.
    • Reduces Bump Steer.
    • Reduces Tie Rod And Ball Joint Wear And Tear.
    • Chrome Hardened 9/16 in. Piston Rod
  • Steering stabilizers are designed to restrain in.bump steering in. and front end vibration, giving added life to tires, ball joints, and other steering components and are highly recommended for vehicles running aftermarket tires. The durable 18mm chrome hardened piston rod and large-bodied cylinder dwarfs factory equipment, ensuring a more effective vibration damping each and every time you take to the trails. Rough Countrys N3 Steering Stabilizer kit is easy to install, with a 100% bolt-on installation process that can be installed in a home garage with common tools.

Additional Fitment Information:
Vehicle Position
1985 - Ford Bronco II Front

Rough Country
  • 1/2x20; Includes Socket Key; Set Of 24
  • Wheel Installation Kit; 1/2x20; Includes Socket Key; Set Of 24;
  • Wheel Installation Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Bulge Acorn Type Lug Nuts
    • Thread Size 1/2X20
    • Includes Socket Key For Easy Installation And Removal
    • Cold Forged Carbon Steel With Enhanced Rigidity
    • Long Lasting Finish
    • Exceeds OEM Standard In Material/Strength/Hardness
    • Corrosion Resistant
    • Easy To Install
  • Secure your new wheels with Rough Countrys Bulge Acorn Style Lug Nuts. These cold-forged lug nuts are plated with a beautiful chrome finish for a long lifespan of corrosion resistance and good looks. Acorn bulge nuts provide over 6% more seating surface area than a standard acorn lug nut. These premium lug nuts are the perfect choice for securing aftermarket wheels, and far exceed OEM strength and hardness. Each lug nut set includes a socket key for easy installation or removal. Choose between black or chrome finish for the perfect compliment to your build!

Additional Fitment Information:
Vehicle
1985 - Ford Ranger

Rough Country
  • 4 in.; 52.688 in. Length; 8.75 in. Uncompressed Arch; 30.122 in. Uncompressed Half Length
  • Leaf Spring; Rear; 4 in.; 52.688 in. Length; 8.75 in. Uncompressed Arch; 30.122 in. Uncompressed Half Length;
  • Leaf Spring
  • Product Attributes:
    • Lift/Drop Height: 4 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Easy Bolt-On Installation
    • Bushings Included
    • Sold As A Pair
  • Added Lift Height and Ride Comfort. Take your suspension kit to the next level with Rough Country's Replacement Leaf Springs. Constructed from high-quality materials and designed specifically for the weight of your vehicle. This enhanced replacement spring will provide a factory-like feel while retaining your suspension lift height. Durable and Off-Road Ready. Rough Country's Replacement Leaf Springs are designed to tackle any terrain that they are faced with. Featuring a multi-leaf design and spring pads this reduces the friction and maximizes comfort. Each leaf pack utilizes tapered leaves for improved flexibility at their ends. Installation. Rough Country's Replacement Leaf Springs offer a 100% bolt-on installation estimated to take approximately 1-2 hours depending on vehicle condition. Simply remove the pre-existing leaf spring and use the stock hardware to equip your vehicle with this high-quality replacement. Lifetime Replacement Warranty. Rough Country's Replacement Leaf is backed with a 5-year replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!

Additional Fitment Information:
Vehicle Position Drive Type
1985 - Ford F-150 Rear 4WD

Rough Country
  • Includes [2] V2 Steering Stabilizers; Brackets; Hardware
  • V2 Dual Steering Stabilizer; Includes [2] V2 Steering Stabilizers; Brackets; Hardware;
  • V2 Dual Steering Stabilizer
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Easy Bolt-On Installation
    • Improves Control And Handling
    • Reduces Bump Steer
    • Reduces Tie Rod And Ball Joint Wear And Tear

Additional Fitment Information:
Vehicle Sub Model
1985 - Ford F-350 Base

Rough Country
  • Includes Mounting Brackets and Hardware Superseded From PN[87342.20]
  • N3 Steering Stabilizer; Includes Mounting Brackets and Hardware;
  • N3 Steering Stabilizer
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Easy Bolt-on Installation.
    • Improves Control And Handling.
    • Reduces Bump Steer.
    • Reduces Tie Rod And Ball Joint Wear And Tear.
    • Chrome Hardened 9/16 in. Piston Rod
  • Steering stabilizers are designed to restrain in.bump steering in. and front end vibration, giving added life to tires, ball joints, and other steering components and are highly recommended for vehicles running aftermarket tires. The durable 18mm chrome hardened piston rod and large-bodied cylinder dwarfs factory equipment, ensuring a more effective vibration damping each and every time you take to the trails. Rough Countrys N3 Steering Stabilizer kit is easy to install, with a 100% bolt-on installation process that can be installed in a home garage with common tools.

Additional Fitment Information:
Vehicle Position Sub Model
1985 - Ford F-350 Front Base

Rough Country
  • Maintains Draglink Alignment; Maintains Turning Radius; Fits 4-6 in. Lift
  • Pitman Arm; Maintains Draglink Alignment; Maintains Turning Radius; Fits 4-6 in. Lift;
  • Pitman Arm
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Maintains Proper Draglink Alignment
    • Maintains Optimum Turning Radius
    • Helps Reduce Steering Vibrations
  • After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.

Additional Fitment Information:
Vehicle Position Sub Model
1985 - Ford F-150 Front Base

Rough Country
  • 2.5 in. Lift
  • Suspension Lift Kit; 2.5 in. Lift;
  • Suspension Lift Kit
  • Product Attributes:
    • Lift/Drop Height: 2.5 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Increased Ground Clearance
    • Levels The Front With The Rear Of The Vehicle
  • Give your 80-96 Ford Bronco an aggressive look from front to rear with Rough Countrys 2.5 in. Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Countrys premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Countrys 2.5 in. Ford Suspension Lift Kit comes with everything you need to fit up to a 32x11.5 in. tire with proper wheel backspacing. Best of all, Rough Countrys 2.5 in. Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.

Additional Fitment Information:
Vehicle Block CC Engine CID
1985 - Ford Bronco L 4917 6 Cyl 4.9L 300

Rough Country
  • 4 in.; Lifted Coil Springs; Radius Arm Drop Brackets; I-Beam Drop Brackets; Power Steering Pitman Arm
  • Suspension Lift Kit; 4 in.; Lifted Coil Springs; Radius Arm Drop Brackets; I-Beam Drop Brackets; Power Steering Pitman Arm;
  • Suspension Lift Kit
  • Product Attributes:
    • Lift/Drop Height: 4 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Increased Ground Clearance
    • Levels The Front With The Rear Of The Vehicle
  • Give your 80-96 Ford Bronco an aggressive look from front to rear with Rough Countrys 4 in. Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs and rear leaf springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and I-Beam drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricated rear blocks offer considerably more strength than their cast iron counterparts. A set of Rough Countrys premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body. Get the wheels you want! Rough Countrys 4 in. Ford Suspension Lift Kit comes with everything you need to fit up to a 33x12.5 in. tire with proper wheel backspacing. Best of all, Rough Countrys 4 in. Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.

Additional Fitment Information:
Vehicle Block CC Engine CID
1985 - Ford Bronco L 4917 6 Cyl 4.9L 300
Showing 1 - 10 of 131 products

Loading...