2000 Chevrolet Timken Parts


Showing 1 - 10 of 35 products
Image
SKU
Product
Rating
Price

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Light Duty
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Drive Type
2000 - Chevrolet Express 2500 Front Inner RWD

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • 7,200 GVW
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Drive Type
2000 - Chevrolet C2500 Front Inner RWD

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Drive Type
2000 - Chevrolet Express 1500 Front Inner RWD

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Trans Type Transmission Position Trans. Speed
2000 - Chevrolet Corvette Transmission Manual Front 6

Timken
  • Grease/Oil Seal
  • 7.25 in. Ring Gear
  • Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up

Additional Fitment Information:
Vehicle Position Drive Type
2000 - Chevrolet Tahoe Front 4WD

Timken
  • Grease/Oil Seal
  • 8.25 in., 9.25 in. Ring Gear
  • Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up

Additional Fitment Information:
Vehicle Position Drive Type
2000 - Chevrolet Silverado 2500 Front 4WD

Timken
  • Driveline Center Support Hanger Bearing
  • 40mm ID - 22mm Width - 57mm Centerline Height - 168mm Bolt Hole Center - 2 Slingers
  • Driveline center support bearings are rigorously inspected to meet Timken performance and quality standards.

Additional Fitment Information:
Vehicle
2000 - Chevrolet C2500

Timken
  • Driveline Center Support Hanger Bearing
  • 40mm ID - 22mm Width - 57mm Centerline Height - 168mm Bolt Hole Center - 2 Slingers - 2 Slingers Both Same
  • Driveline center support bearings are rigorously inspected to meet Timken performance and quality standards.

Additional Fitment Information:
Vehicle
2000 - Chevrolet C3500

Timken
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2000 - Chevrolet S10 V - Rear GAS 6 Cyl 4.3L 262

Timken
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Position Drive Type
2000 - Chevrolet Silverado 2500 Front 4WD
Showing 1 - 10 of 35 products

Loading...