1985 Mazda Air and Fuel Delivery Parts

Choose a Model for your 1985 Mazda

626 GLC RX-7

Showing 1 - 10 of 19 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1985 Mazda 626 Electric Fuel Pump Mr Gasket

For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
Electric Fuel Pump
Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:

Vehicle
1985 - Mazda 626

75 In Stock

$87.56 CAD

$105.07 CAD

Brand	Mr Gasket
Part #	G1242S
Condition	New
Warehouse	B

1985 Mazda RX-7 Electric Fuel Pump 2 Cyl 1.1L Mr Gasket

For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
Electric Fuel Pump
Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:

Vehicle	Block	CC	Engine	Sub Model	CID
1985 - Mazda RX-7	R	1146	2 Cyl 1.1L	GSL	-

75 In Stock

$87.56 CAD

$105.07 CAD

Brand	Mr Gasket
Part #	G1242S
Condition	New
Warehouse	B

1985 Mazda RX-7 Fuel Injector O-Ring - Upper 2 Cyl 1.3L Nippon Reinz

1985 Mazda RX-7 Fuel Injector O-Ring - Upper 2 Cyl 1.3L Nippon Reinz

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Located at top of Fuel Injector.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1985 - Mazda RX-7	R	1308	Upper	2 Cyl 1.3L	-

1 In Stock

$14.34 CAD

$17.21 CAD

Brand	Nippon Reinz
Part #	NRZ1755189
Condition	New
Warehouse	A

1985 Mazda RX-7 Fuel Injector Seal - Center 2 Cyl 1.3L Ishino Stone

1985 Mazda RX-7 Fuel Injector Seal - Center 2 Cyl 1.3L Ishino Stone

Grommet - Top of Injector.
Upper

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1985 - Mazda RX-7	R	1308	Center	2 Cyl 1.3L	-

4 In Stock

$17.94 CAD

$21.53 CAD

Brand	Ishino Stone
Part #	ISH1755266
Condition	New
Warehouse	A

1985 Mazda 626 Fuel Tank Cap Gates

OE Equivalent

Additional Fitment Information:

Vehicle	Fuel Type
1985 - Mazda 626	GAS

1 In Stock

$7.98 CAD

$9.58 CAD

Brand	Gates
Part #	GAT1756657
Condition	New
Warehouse	A

1985 Mazda 626 Carburetor Redline

32/36 DGEV
with Electric Choke - 32/36 DGEV REDLINE WEBER 32/36 Progressive Carburetor Conversion.
Electric Choke

Additional Fitment Information:

Vehicle	Fuel Type
1985 - Mazda 626	GAS

Brand	Redline
Part #	WEB1598969
Condition	New
Warehouse	A

1985 Mazda GLC Carburetor Redline

32/36 DGEV
DGEV REDLINE WEBER 32/36 Progressive Carburetor Conversion.
Electric Choke
DGEV

Additional Fitment Information:

Vehicle
1985 - Mazda GLC

Brand	Redline
Part #	WEB1599373
Condition	New
Warehouse	A

1985 Mazda RX-7 Fuel Injection Pressure Damper 2 Cyl 1.3L Genuine

1985 Mazda RX-7 Fuel Injection Pressure Damper 2 Cyl 1.3L Genuine

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1985 - Mazda RX-7	R	1308	2 Cyl 1.3L	-

Brand	Genuine
Part #	OES1794975
Condition	New
Warehouse	A

1985 Mazda RX-7 Fuel Injector O-Ring - Lower 2 Cyl 1.3L Genuine

1985 Mazda RX-7 Fuel Injector O-Ring - Lower 2 Cyl 1.3L Genuine

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Air Bleed O-Ring

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1985 - Mazda RX-7	R	1308	Lower	2 Cyl 1.3L	-

Brand	Genuine
Part #	OES1638989
Condition	New
Warehouse	A

1985 Mazda 626 Carburetor Redline

32/36 DGV
with Electric Choke - 32/36 DGEV REDLINE WEBER 32/36 Progressive Carburetor Conversion.
Manual Choke

Additional Fitment Information:

Vehicle	Fuel Type
1985 - Mazda 626	GAS

Brand	Redline
Part #	WEB1941156
Condition	New
Warehouse	A

Showing 1 - 10 of 19 products

1985 Mazda Air and Fuel Delivery Parts

Air and Fuel Delivery Parts in Canada

Canada Air and Fuel Delivery Parts

Filters

Our Store

Information

Safe & Secure Shopping